Slide 1 : Faraday’s laws and applications of Kohlrausch’s laws Ramana Murthy. P
Slide 2 :
Introduction : Introduction Electrochemistry is a branch of chemistry that studies chemical reactions which take place in a solution at the interface of an electron conductor (a metal or a semiconductors) and an ionic conductor (the electolyte), and which involve electron transfer between the electrode and the electrolyte or species in solution.
Alessandro Volta's discovery, in 1793, that electricity could be produced by placing two dissimilar metals on opposite sides of a moistened paper.
In 1800, Nicholson and Carlisle, using Volta’s primitive battery as a source, showed that an electric current could decompose water into oxygen and hydrogen.
By 1812, the Swedish chemist Berzelius could propose that all atoms are electrified, hydrogen and the metals being positive, the nonmetals negative.
Humphry Davy prepared the first elemental sodium by electrolysis of a sodium hydroxide melt.
Michael Faraday, to show that there is a direct relation between the amount of electric charge passed through the solution and the quantity of electrolysis products
Chemical reactions where electrons are transferred between molecules are called oxidation/reduction (redox) reactions. In general, electrochemistry deals with situations where oxidation and reduction reactions are separated in space or time, connected by an external electric circuit to understand each process.
Electron Transfer Reactions : Electron Transfer Reactions Electron transfer reactions are oxidation-reduction or redox reactions.
Results in the generation of an electric current (electricity) or be caused by imposing an electric current.
Therefore, this field of chemistry is often called ELECTROCHEMISTRY.
Terminology for Redox Reactions : Terminology for Redox Reactions OXIDATION :loss of electron(s) by a species; increase in oxidation number; increase in oxygen.
REDUCTION: Gain of electron(s); decrease in oxidation number; decrease in oxygen; increase in hydrogen.
OXIDIZING AGENT: Electron acceptor; species is reduced.
REDUCING AGENT: Eelectron donor; species is oxidized.
OXIDATION-REDUCTION REACTIONS : OXIDATION-REDUCTION REACTIONS Direct Redox Reaction
Oxidizing and reducing agents in direct contact.
Cu(s) + 2 Ag+(aq) ---> Cu2+(aq) + 2 Ag(s)
Why Study Electrochemistry? : Why Study Electrochemistry? Batteries
Corrosion
Industrial production of chemicals such as Cl2, NaOH, F2 and Al
Biological redox reactions The heme group
Classification of Conductors : Classification of Conductors These may be divided into three main categories; they are:
(I) gaseous (II) metallic or electronic (III) electrolytic.
Gases conduct electricity with difficulty and only under the influence of high potentials or if exposed to the action of certain radiations.
Metallic or electronic conductors : Conductors which transfer electric current by transfer of electrons, without transfer of any matter, are known as metallic or electronic conductors. Metals such as copper, silver, aluminum, etc., non-metals like carbon (graphite - an allotropic form of carbon) and various alloys belong to this class.
Electrolytic conductors : (a) Conductors like aqueous solutions of acids, bases and salts in which the flow of electric current is accompanied by chemical decomposition are known as electrolytic conductors.
b)The substances whose aqueous solutions do not conduct electric current are called non-electrolytes. Solutions of cane sugar, glycerine, alcohol, etc., are examples of non-electrolytes.
Slide 9 : Fig. 1. Illustration of electrochemical terms
Slide 10 : Mechanisam of electrolytic conduction and electrolysis The overall reaction is
2NaCl(aq) + 2H2O(l) 2Na+(aq) + 2OH-(aq) + Cl2(g)+ H2(g)
Electrolysis of sodium chloride solution : Electrolysis of sodium chloride solution NaCl ↔ Na+ + Cl-
H2O ↔ H+ + OH-
At cathode At Anode
H+ + e- → H Cl- → Cl + e-
2H → H2 2Cl → Cl2 Electrolysis of copper sulphate solution using platinum electrodes
CuSO4 ↔ Cu2+ + SO42-
H2O ↔ H+ + OH-
At cathode At Anode
Cu2+ + 2e- → Cu 2OH- → H2O + O + 2e-
O + O→O2
Slide 12 : The decreasing order of discharge potential or the increasing order of deposition of some of the ions is given below:
For cations: K+, Na+, Ca2+, Mg2+, Al3+, Zn2+, H+, Cu2+, Hg2+, Ag+
For anions: SO42-, NO3-, OH-, Cl-, Br-, I- Some more examples of electrolysis
TABLE OF STANDARD REDUCTION POTENTIALS : TABLE OF STANDARD REDUCTION POTENTIALS 2 To determine an oxidation from a reduction table, just take the opposite sign of the reduction!
Slide 14 :
Faraday’s laws of electrolysis : Faraday’s laws of electrolysis The laws, which govern the deposition of substances (In the form of ions) on electrodes during the process of electrolysis, is called Faraday's laws of electrolysis. These laws given by Michael Faraday in 1833.
Faraday's first law: It states that, the mass of any substance deposited or liberated at any electrode is directly proportional to the quantity of electricity passed.
W α Q
W = Mass of ions liberated in gm,
Q = Quantity of electricity passed in Coulombs
= Current in Amperes ( i ) × Time in second (t)
W α i t
W = Z i t
Where, Z = constant, known as electrochemical equivalent (ECE) of the ion deposited
Slide 16 : Faraday's second law: It states that, when the same quantity of electricity is passed through different electrolytes, the masses of different ions liberated at the electrodes are directly proportional to their chemical equivalents (Equivalent weights).
W α E
W1/W2 = E1/E2 or Z1it / Z2it or Z1/Z2 = E1/E2 (W = Zit)
E α Z or E = FZ or E = 96500 × Z
Faraday's law for gaseous electrolytic product for the gases, we use V = It Ve/96500
Where, V = Volume of gas evolved at S.T.P. at an electrode
Ve = Equivalent volume = Volume of gas evolved at an electrode at S.T.P. by 1 Faraday charge
Slide 17 : conductance and its measurement
Ohm’s law : Ohm’s law Metallic as well as electrolytic conductors obey Ohm’s law which states the strength of current (I) flowing through a conductor is directly proportional difference (V) applied across the conductor and is inversely proportional to the resistance (R ) of the conductor
I = V/R
R - Resistance in V/A = Ω (Ohm)
V - Voltage or potential difference in Volts, V
I - Current in Amperes, A
If a material has a resistance of 1 Ω, it means that when applying a potential difference of 1 V, the current in the material is 1 A.
Slide 19 : For metals:
Ohm’s Law R: resistance
Dimension: Ohm, Conductance is the ability of a material to pass electrons C = 1 / R R = V/I
Specific conductance or conductivity : Specific conductance or conductivity The resistance of any conductor varies directly as its length (l) and inversely as its cross sectional area (a), i.e.,
R α 1/a or R = ρ 1/a , Here ρ = specific resistance
If l = 1 cm and a = 1 cm2, then
R = ρ
Κ= 1/ρ, Κ = kappa - the specific conductance
ρ = a/l. R or 1/ρ = 1/a.1/R
K = 1/a×C (1/z = cell constant)
Specific conductance = cell constant x Conductance
The unit of specific conductance is ohm-1 cm-1.
Specific conductance or conductivity : Specific conductance or conductivity Specific conductance depend on the nuber of ions present in unit volume (1 ml ) solution Representation of specific conductance
Slide 22 : To understand the manning of equivalent conductance, imagine a rectangular trough with two opposite sides made of metallic conductor (acting as electrodes) exactly 1 cm apart, If 1 cm3 (1 mL) solution containing 1 gram equivalent of an electrolyte is places in this container is measured.
/\ = KV
In case, if the concentration of the solution is c g equivalent per litre, then the volume containing 1 g equivalent of the electrolyte will be 1000/C.
So equivalent conductance
/\ k 1000/c
/\ = k × 1000/N
Where N = normality
The unit of equivalent conductance is ohm-1 cm-2 equi-1. Equivalent conductance (/\)
Slide 23 : One of the factors on which the conductance of an electrolytic solution depends is the concentration of the solution. In order to obtain comparable results for different electrolytes, it is necessary to take equivalent conductances.
Equivalent conductance is defined as the conductance of all the ions produced by one gram equivalent of an electrolyte in a given solution. Representation of Equivalent conductance
Molar conductance : Molar conductance The molar conductance is defined as the conductance of all the ions produced by ionization of 1 g mole of an electrolyte when present in V mL of solution. It is denoted by.
Molar conductance Λ m = k ×V
Where V is the volume in mL containing 1 g mole of the electrolyte. If c is the concentration of the solution in g mole per litre, then
Λ m = k × 1000/c
It units are ohm-1 cm2 mol-1.
Equivalent conductance = (Molar conductance)/n
Where n = (Molecular mass) / (Equivalent mass)
Effect of dilution on equivalent conductance : Effect of dilution on equivalent conductance Conductance’s of electrolytes of different type
Slide 26 : Kohlrausch’s law of independent ionic mobilities At time infinite dilution (m) , the molar conductivity of an electrolyte can be expressed as the sum of the contributions from its individual ions Λ∞m = v+ λ∞ + + v- λ∞- v+ and v- are the number of cations and anions per formula unit of electrolyte respectively and, λ∞+ and λ∞- are the molar conductivities of the cation and anion at infinite dilution respectively
Applications of Kohlrausch's law : Applications of Kohlrausch's law Determination of Λ∞m for weak electrolytes
Determination of the degree of ionization of a weak electrolyte
Determination of the ionization constant of a weak electrolyte
Determination of the solubility of a sparingly soluble salt
Determination of Λ∞m for weak electrolytes : Determination of Λ∞m for weak electrolytes The molar conductivity of a weak electrolyte at infinite dilution (Λ∞m) cannot be determined by extrapolation method. However, Λ∞m values for weak electrolytes can be determined by using the Kohlrausch's equation.
Λ∞CH3 COOH = Λ∞CH3COONa + Λ∞HCI - Λ∞NaCI
Determination of the degree of ionization of a weak electrolyte : Determination of the degree of ionization of a weak electrolyte The degree of ionization is given by
ac = Λcm /Λ∞m = Λcm / ( v+ λ∞+ + v- λ∞- )
Thus, knowing the value of Λcm, and Λ∞m (From the Kohlrausch's equation), the degree of ionization at any concentration (ac) can be determined. Determination of the ionization constant of a weak electrolyte ( K ) = C(Λcm / Λ∞m )2 / [ 1 - ( Λcm / Λ∞m )] = C(Λcm)2 / Λ∞m - Λcm ) We know Λ∞m and Λcm at any concentration, the ionisation constant (K) of the electrolyte can be determined.
Determination of the solubility of a sparingly soluble salt : Determination of the solubility of a sparingly soluble salt the molar conductivity of a sparingly soluble salt at infinite dilution
Λ∞m = V+λ∞+ + V-λ∞-
Λ∞salt = 1000 ksalt / Cm
Cm = 1000 ksalt / ( V+λ∞+ + V-λ∞- ),
Cm is the molar concentration of the sparingly soluble salt in its saturated solution.
Thus,Cm is equal to the solubility of the sparingly soluble salt in the mole per litre units. The solubility of the salt in gram per litre units can be obtained by multiplying Cm with the molar mass of the salt.
Slide 31 : •Electrons travel thru external wire.
Salt bridge allows anions and cations to move between electrode compartments. Zn --> Zn2+ + 2e- Cu2+ + 2e- --> Cu <--Anions
Cations--> Oxidation
Anode
Negative Reduction
Cathode
Positive RED CAT
Charging a Battery : Charging a Battery When you charge a battery, you are forcing the electrons backwards (from the + to the -). To do this, you will need a higher voltage backwards than forwards. This is why the ammeter in your car often goes slightly higher while your battery is charging, and then returns to normal. In your car, the battery charger is called an alternator. If you have a dead battery, it could be the battery needs to be replaced OR the alternator is not charging the battery properly.
H2 as a Fuel : H2 as a Fuel Cars can use electricity generated by H2/O2 fuel cells.
H2 carried in tanks or generated from hydrocarbons