Applied Mechanics Stuff

GET 252 : Applied Mechanics II Assignment on Beams For relevant problem (based on the data given to you), Part A 1. Determine the reactions at supports. ((Submit as Word document attachment to e-mail) 2. Determine expressions for the internal shear forces and bending moments in each section of the beam. (Submit as Word document attachment to e-mail) 3. Draw shear force and bending moment diagrams for the beam indicating points of maximum and minimum shear force and bending moment. (Submit as Word document attachment to e-mail) 4. Determine the maximum shear force and bending moment on the beam (Submit on webpage - Result No. 1 & 2) Part B: 1. Determine the deflection at the midpoint of the beam with cross-section of 50mm x 250mm. (Submit on webpage - Result No. 3) 2. Find the minimum moment of inertia necessary for the beam if the beam is to deflect no more than 10mm at the center of the beam. (Submit on webpage- Result No. 4) 3. Find the maximum deflection on the beam. (Submit on webpage - Result No.5) Take E= 200 GN/m2 Fig. A1: Simply Supported Fig. A2: Overhanging Beam Fig. A3: Cantilever Beam Fig. A4: Overhanging Beam Fig. A5: Overhanging Beam Fig. A6: Overhanging Beam Fig. A7: Overhanging Beam