Internal Architecture of Laptops and Notebook Computers online Test

The different types of batteries used by laptops include----------, --------------- and. Nickel cadmium batteries were in wide use previously. They offered good output at a low cost to the earlier laptop users. However, the lithium ion and nickel metal hydride batteries are popular presently.
Nickel-cadmium
Nickel-cadmium, lithium ion and nickel-metal hydride
Nickel-metal hydride
None of the above
The -------------on the motherboard enable you to configure the motherboard.
jumpers
Connectors
expansion slots
None of the above
PCMCIA stands for---------------------------------------------, which is a foundation that developed a standard for device cards.
Personal Computer Memory Card Internet Access
Personal Computer Memory Card International Academy
Personal Computer Memory Card Internet Association
Personal Computer Memory Card International Association
The different types of PCMCIA cards are:
Type-I & Type-II
Type-I ,Type-II & Type-III
Type-I ,Type-II , Type-III & Type-IV
Type-I ,Type-II ,Type-III ,Type-IV & Type-V
PCMIA Type I - Used mostly for connecting to -----------. These cards are about 3.3 mm. thick.
memory devices
a modem, a SCSI device or a sound device
Used to connect to hard drives
None of the above
Type II - Typically connects to------------------------------------------------------. These cards are about 5.5 mm. thick. The Type III slot can accommodate a single Type III card. It is possible to simultaneously connect any combination of two Type I and Type II cards in a Type III slot.
Memory devices
a modem, a SCSI device or a sound device
Used to connect to hard drives
None of the above
Type III - Used to-------------------------------------. These cards are about 10.5 mm. thick.
memory devices
a modem, a SCSI device or a sound device
Used to connect to hard drives
None of the above
The different types of cards have slots of corresponding sizes. The Type I slot can accommodate only one--------------------.
Type I Icard
Type I card
Type III card
Type IV card
The Type II slot can hold a single ----------------------?
Type I card
Type II card
Type I or Type II card
Type I and Type II card
The Type III slot can accommodate a single ------------------- It is possible to simultaneously connect any combination of two Type I and Type II cards in a Type III slot.
Type I card
Type II card
Type III card
Type IV card
The ------------------on laptops enable the laptop to communicate with other devices without using cables or wires. Thus, they enable wireless communication between laptops and other devices.
Serial port
Infrared ports
Parallel port
USB port
The infrared ports communicate and transmit data using------------------------------. This is somewhat similar to the way a TV remote communicates with the TV.
infrared light waves
microwaves
Light
LASER
The motherboard has a CMOS battery that provides backup power to the---------------------------.
CMOS
Mother board
CPU
None of the above
The---------------------and --------------------------- which constitute a modern chipset, are the most important components on the motherboard.
southbridge and easrbridge
northbridge and southbridge
northbridge and eastbridge
northbridge and westbridge
The buses on a system are the --------------through which every device on the system sends and receives information.
paths or wires
devices
chips
components
----------------- measured in bits, is the amount of data that can be carried by a bus at any given instant. _
Bus width
Bus speed
Bus length
None of the above
-----------------, measured in MegaHertz, is the speed at which data is transferred across the bus.
Bus speed
Bus width
Bus speed
Bus length
The leading manufacturers of chipsets include Intel, VIA and AMD. You must configure the motherboard using the------------, before you perform motherboard installation in the system case. You must install the CPU, fan and heat sink on the motherboard before you install the motherboard in the system case You must follow the instructions in the motherboard manual when perform configuration, installation or troubleshooting of the motherboard.
jumpers
Connectors
expansion slots
None of the above
The buses on a system can be classified into two main categories:
System bus & I/O buses
Address bus & data bus
Data bus & Control bus
None of the above
The different bus architectures are :
Video Electronics Standards Association (VESA) & Extended Industrial Standard Architecture (EISA)
Peripheral Component Interconnect (PCI) & Microchannel Architecture (MCA)
Accelerated Graphics Port (AGP) & Industrial Standard Architecture (ISA)
All of the above
Description:

This test is to check your concepts on the internal architecture of Laptops,various slots on the mother board of laptops and the buses such as address, data and control bus.
Disclaimer: Content, such as images used in the questions (if any), have been picked up from various places for the sole purpose of Instruction.

Discussion

Your Facebook Friends on WizIQ

More Tests By Author

ASP Server Controls
10 Questions | 491 Attempts

ASP.NET, Namespaces ASP.NET
10 Questions | 1725 Attempts

An ASP.NET Application
10 Questions | 329 Attempts

Test your basic knowledge on DATASTRUCTURES, STACK
10 Questions | 1138 Attempts